Fence Installation Cost in South Carolina (2026)

Quick answer: a 6 ft pressure-treated privacy fence in South Carolina costs about $18–$26 per linear foot installed, or $2,770–$3,910 for a 150 ft run. That is 10% below the national figure, and ranks South Carolina 14 of 50 from cheapest to most expensive.

Carpenter median wage

$23.51/hr

Construction laborer median

$19.86/hr

Price level (RPP, all items)

93.7

Goods price level (RPP)

96.3

South Carolina fence cost calculator

Prefilled with South Carolina's labor index (0.84) and materials index (0.97). Change any input.

Length (ft)Height (ft)MaterialGatesTerrainPermit ($)

Estimate

$3,700

Range

$3,150–$4,450

Labor

$1,510

Per foot

$24.70

Same math as the cost to install a fence calculator, with the South Carolina indexes applied. Gates at $350 each.

South Carolina fence cost by material

Installed fence cost per foot and for a 150 ft run in South Carolina
Material	Per foot	150 ft run	Labor share
Pressure-treated pine (6 ft privacy)	$18–$26	$2,770–$3,910	46%
Cedar (6 ft privacy)	$26–$37	$3,970–$5,600	38%
Vinyl (6 ft privacy)	$28–$40	$4,210–$5,950	36%
Chain link	$12–$17	$1,840–$2,600	46%
Aluminum	$33–$46	$4,920–$6,950	35%

Flat ground, no gates, permit or tear-out. Add gates, slope and removal in the calculator above.

What sets the price in South Carolina

Labor. Fence crews are mostly carpenters and general construction laborers. In South Carolina the mean carpenter wage is $24.89 an hour, 19% below the US mean of $30.78, and construction laborers average $21.46, 13% below the US mean of $24.64. Averaging the two gives a labor index of 0.84. BLS also counts about 0 dedicated fence erectors in the state, with a median wage of $18.65; that sample is small, so we show it for context rather than build the index on it.

Materials. The Bureau of Economic Analysis puts South Carolina's price level for goods at 96.3 (US = 100), so posts, boards, panels and concrete cost about 3% less than the national average. Housing costs (80.5) swing much more than goods do, which is why the overall price level (93.7) moves further from 100 than the materials index.

In South Carolina the labor side moves the total more than materials, so getting several bids, booking in the slow season and doing your own tear-out save the most. On this index South Carolina sits next to Florida ($22/ft mid) and Kansas ($22/ft mid).

How this estimate is built

Start from our national rate for a 6 ft pressure-treated fence on flat ground: $12 per foot of materials and $12 of labor (the same rates as the install cost calculator).
Multiply the materials part by South Carolina's goods price parity ratio: 96.3 ÷ 99.6 = 0.968 → $11.62/ft.
Multiply the labor part by the wage index: (0.809 + 0.871) ÷ 2 = 0.840 → $10.08/ft.
Bracket the $21.70 total at −15% / +20% for site differences: $18–$26 per foot.

These are planning estimates, not quotes. Frost depth, rock, slope and setbacks change the job; check local code and your permit office before you dig, and read the fence permit guide.

Sources

South Carolina fence cost FAQ

How much does a fence cost in South Carolina?

A 6 ft pressure-treated wood privacy fence in South Carolina works out at about $18–$26 per linear foot installed on our model, or $2,770–$3,910 for a 150 ft backyard run before gates and permit. That is 10% below the national figure of $20–$29 per foot.

How much do fence installers earn in South Carolina?

BLS reports a median wage of $18.65 an hour for fence erectors in South Carolina (May 2024, about 0 workers). Carpenters earn a median $23.51 and construction laborers $19.86. Contractor labor rates are higher than wages because they include overhead, insurance and profit.

Is South Carolina an expensive state to build a fence in?

South Carolina ranks 14 of 50 from cheapest to most expensive on this index. Labor runs 16% below the US level and goods prices 3% below it, so labor rates explain most of the difference from the national average.

How much would I save building a fence myself in South Carolina?

Labor is about 46% of a pressure-treated fence here, roughly $1,510 on a 150 ft run. You would still pay for tools, an auger rental and your own weekends, and you take on the risk of a crooked line or posts set too shallow.

Other states

Alabama · Alaska · Arizona · Arkansas · California · Colorado · Connecticut · Delaware · Florida · Georgia · Hawaii · Idaho · Illinois · Indiana · Iowa · Kansas · Kentucky · Louisiana · Maine · Maryland · Massachusetts · Michigan · Minnesota · Mississippi · Missouri · Montana · Nebraska · Nevada · New Hampshire · New Jersey · New Mexico · New York · North Carolina · North Dakota · Ohio · Oklahoma · Oregon · Pennsylvania · Rhode Island · South Dakota · Tennessee · Texas · Utah · Vermont · Virginia · Washington · West Virginia · Wisconsin · Wyoming

← All 50 states compared

📱 Free Android Apps by Dixon App Studio

Take every calculator to the job site. Every app is free, works offline and needs no sign-up.