Fence Installation Cost in New Hampshire (2026)

Quick answer: a 6 ft pressure-treated privacy fence in New Hampshire costs about $20–$28 per linear foot installed, or $2,990–$4,220 for a 150 ft run. That is 2% below the national figure, and ranks New Hampshire 32 of 50 from cheapest to most expensive.

Carpenter median wage

$28.79/hr

Construction laborer median

$23.05/hr

Price level (RPP, all items)

104.2

Goods price level (RPP)

98.6

New Hampshire fence cost calculator

Prefilled with New Hampshire's labor index (0.96) and materials index (0.99). Change any input.

Length (ft)Height (ft)MaterialGatesTerrainPermit ($)

Estimate

$3,960

Range

$3,370–$4,760

Labor

$1,730

Per foot

$26.42

Same math as the cost to install a fence calculator, with the New Hampshire indexes applied. Gates at $350 each.

New Hampshire fence cost by material

Installed fence cost per foot and for a 150 ft run in New Hampshire
Material	Per foot	150 ft run	Labor share
Pressure-treated pine (6 ft privacy)	$20–$28	$2,990–$4,220	49%
Cedar (6 ft privacy)	$28–$40	$4,240–$5,990	40%
Vinyl (6 ft privacy)	$30–$42	$4,490–$6,340	38%
Chain link	$13–$19	$1,990–$2,810	49%
Aluminum	$35–$49	$5,240–$7,400	37%

Flat ground, no gates, permit or tear-out. Add gates, slope and removal in the calculator above.

What sets the price in New Hampshire

Labor. Fence crews are mostly carpenters and general construction laborers. In New Hampshire the mean carpenter wage is $29.51 an hour, 4% below the US mean of $30.78, and construction laborers average $23.78, 3% below the US mean of $24.64. Averaging the two gives a labor index of 0.96. BLS also counts about 0 dedicated fence erectors in the state, with a median wage of $23.01; that sample is small, so we show it for context rather than build the index on it.

Materials. The Bureau of Economic Analysis puts New Hampshire's price level for goods at 98.6 (US = 100), so posts, boards, panels and concrete cost about 1% less than the national average. Housing costs (114.9) swing much more than goods do, which is why the overall price level (104.2) moves further from 100 than the materials index.

In New Hampshire the labor side moves the total more than materials, so getting several bids, booking in the slow season and doing your own tear-out save the most. On this index New Hampshire sits next to Michigan ($23/ft mid) and Indiana ($23/ft mid).

How this estimate is built

Start from our national rate for a 6 ft pressure-treated fence on flat ground: $12 per foot of materials and $12 of labor (the same rates as the install cost calculator).
Multiply the materials part by New Hampshire's goods price parity ratio: 98.6 ÷ 99.6 = 0.990 → $11.88/ft.
Multiply the labor part by the wage index: (0.959 + 0.965) ÷ 2 = 0.962 → $11.54/ft.
Bracket the $23.42 total at −15% / +20% for site differences: $20–$28 per foot.

These are planning estimates, not quotes. Frost depth, rock, slope and setbacks change the job; check local code and your permit office before you dig, and read the fence permit guide.

Sources

New Hampshire fence cost FAQ

How much does a fence cost in New Hampshire?

A 6 ft pressure-treated wood privacy fence in New Hampshire works out at about $20–$28 per linear foot installed on our model, or $2,990–$4,220 for a 150 ft backyard run before gates and permit. That is 2% below the national figure of $20–$29 per foot.

How much do fence installers earn in New Hampshire?

BLS reports a median wage of $23.01 an hour for fence erectors in New Hampshire (May 2024, about 0 workers). Carpenters earn a median $28.79 and construction laborers $23.05. Contractor labor rates are higher than wages because they include overhead, insurance and profit.

Is New Hampshire an expensive state to build a fence in?

New Hampshire ranks 32 of 50 from cheapest to most expensive on this index. Labor runs 4% below the US level and goods prices 1% below it, so labor rates explain most of the difference from the national average.

How much would I save building a fence myself in New Hampshire?

Labor is about 49% of a pressure-treated fence here, roughly $1,730 on a 150 ft run. You would still pay for tools, an auger rental and your own weekends, and you take on the risk of a crooked line or posts set too shallow.

Other states

Alabama · Alaska · Arizona · Arkansas · California · Colorado · Connecticut · Delaware · Florida · Georgia · Hawaii · Idaho · Illinois · Indiana · Iowa · Kansas · Kentucky · Louisiana · Maine · Maryland · Massachusetts · Michigan · Minnesota · Mississippi · Missouri · Montana · Nebraska · Nevada · New Jersey · New Mexico · New York · North Carolina · North Dakota · Ohio · Oklahoma · Oregon · Pennsylvania · Rhode Island · South Carolina · South Dakota · Tennessee · Texas · Utah · Vermont · Virginia · Washington · West Virginia · Wisconsin · Wyoming

← All 50 states compared

📱 Free Android Apps by Dixon App Studio

Take every calculator to the job site. Every app is free, works offline and needs no sign-up.