Fence Installation Cost in Massachusetts (2026)
Quick answer: a 6 ft pressure-treated privacy fence in Massachusetts costs about $23–$33 per linear foot installed, or $3,490–$4,920 for a 150 ft run. That is 14% above the national figure, and ranks Massachusetts 45 of 50 from cheapest to most expensive.
Massachusetts fence cost calculator
Prefilled with Massachusetts's labor index (1.29) and materials index (0.99). Change any input.
Same math as the cost to install a fence calculator, with the Massachusetts indexes applied. Gates at $350 each.
Massachusetts fence cost by material
| Material | Per foot | 150 ft run | Labor share |
|---|---|---|---|
| Pressure-treated pine (6 ft privacy) | $23–$33 | $3,490–$4,920 | 56% |
| Cedar (6 ft privacy) | $32–$45 | $4,830–$6,810 | 48% |
| Vinyl (6 ft privacy) | $34–$48 | $5,080–$7,170 | 45% |
| Chain link | $15–$22 | $2,320–$3,280 | 56% |
| Aluminum | $39–$56 | $5,910–$8,350 | 44% |
Flat ground, no gates, permit or tear-out. Add gates, slope and removal in the calculator above.
What sets the price in Massachusetts
Labor. Fence crews are mostly carpenters and general construction laborers. In Massachusetts the mean carpenter wage is $37.19 an hour, 21% above the US mean of $30.78, and construction laborers average $33.63, 36% above the US mean of $24.64. Averaging the two gives a labor index of 1.29. BLS also counts about 0 dedicated fence erectors in the state, with a median wage of $21.91; that sample is small, so we show it for context rather than build the index on it.
Materials. The Bureau of Economic Analysis puts Massachusetts's price level for goods at 98.8 (US = 100), so posts, boards, panels and concrete cost about 1% less than the national average. Housing costs (128.1) swing much more than goods do, which is why the overall price level (105.8) moves further from 100 than the materials index.
In Massachusetts the labor side moves the total more than materials, so getting several bids, booking in the slow season and doing your own tear-out save the most. On this index Massachusetts sits next to Alaska ($27/ft mid) and New York ($27/ft mid).
How this estimate is built
- Start from our national rate for a 6 ft pressure-treated fence on flat ground: $12 per foot of materials and $12 of labor (the same rates as the install cost calculator).
- Multiply the materials part by Massachusetts's goods price parity ratio: 98.8 ÷ 99.6 = 0.992 → $11.90/ft.
- Multiply the labor part by the wage index: (1.208 + 1.365) ÷ 2 = 1.287 → $15.44/ft.
- Bracket the $27.35 total at −15% / +20% for site differences: $23–$33 per foot.
These are planning estimates, not quotes. Frost depth, rock, slope and setbacks change the job; check local code and your permit office before you dig, and read the fence permit guide.
Sources
- BLS Occupational Employment and Wage Statistics, May 2024 state estimates
- BLS OEWS: Roofers (47-2181)
- BLS OEWS: Carpenters (47-2031)
- BLS OEWS: Construction Laborers (47-2061)
- BLS OEWS: Fence Erectors (47-4031)
- BEA Regional Price Parities by State, 2024
Massachusetts fence cost FAQ
How much does a fence cost in Massachusetts?
A 6 ft pressure-treated wood privacy fence in Massachusetts works out at about $23–$33 per linear foot installed on our model, or $3,490–$4,920 for a 150 ft backyard run before gates and permit. That is 14% above the national figure of $20–$29 per foot.
How much do fence installers earn in Massachusetts?
BLS reports a median wage of $21.91 an hour for fence erectors in Massachusetts (May 2024, about 0 workers). Carpenters earn a median $34.19 and construction laborers $30.02. Contractor labor rates are higher than wages because they include overhead, insurance and profit.
Is Massachusetts an expensive state to build a fence in?
Massachusetts ranks 45 of 50 from cheapest to most expensive on this index. Labor runs 29% above the US level and goods prices 1% below it, so labor rates explain most of the difference from the national average.
How much would I save building a fence myself in Massachusetts?
Labor is about 56% of a pressure-treated fence here, roughly $2,320 on a 150 ft run. You would still pay for tools, an auger rental and your own weekends, and you take on the risk of a crooked line or posts set too shallow.
Other states
Alabama · Alaska · Arizona · Arkansas · California · Colorado · Connecticut · Delaware · Florida · Georgia · Hawaii · Idaho · Illinois · Indiana · Iowa · Kansas · Kentucky · Louisiana · Maine · Maryland · Michigan · Minnesota · Mississippi · Missouri · Montana · Nebraska · Nevada · New Hampshire · New Jersey · New Mexico · New York · North Carolina · North Dakota · Ohio · Oklahoma · Oregon · Pennsylvania · Rhode Island · South Carolina · South Dakota · Tennessee · Texas · Utah · Vermont · Virginia · Washington · West Virginia · Wisconsin · Wyoming
📱 Free Android Apps by Dixon App Studio
Take every calculator to the job site. Every app is free, works offline and needs no sign-up.
Smart Fencing CalculatorThis site
Fence posts, pickets, rails, concrete, gates and total project cost.
Get it on Google PlaySmart Decking Calculator
Deck boards, joists, footings, railings and material cost estimates.
Get it on Google PlaySmart Drywall Calculator
Drywall sheets, mud, tape, screws and finishing cost estimates.
Get it on Google PlaySod Calculator: Mulch, Topsoil
Sod pallets, mulch, topsoil and seed for the yard around your new fence.
Get it on Google PlayGravel & Stone Calculator
Gravel, crushed stone and base rock in tons and cubic yards.
Get it on Google Play